1 # $Id: sample-ngircd.conf,v 1.44 2008/01/07 23:02:29 alex Exp $
4 # This is a sample configuration file for the ngIRCd, which must be adepted
5 # to the local preferences and needs.
7 # Comments are started with "#" or ";".
9 # A lot of configuration options in this file start with a ";". You have
10 # to remove the ";" in front of each variable to actually set a value!
11 # The disabled variables are shown with example values for completeness.
13 # Use "ngircd --configtest" (see manual page ngircd(8)) to validate that the
14 # server interprets the configuration file as expected!
18 # The [Global] section of this file is used to define the main
19 # configuration of the server, like the server name and the ports
20 # on which the server should be listening.
22 # Server name in the IRC network, must contain at least one dot
23 # (".") and be unique in the IRC network. Required!
26 # Info text of the server. This will be shown by WHOIS and
27 # LINKS requests for example.
28 Info = Server Info Text
30 # Global password for all users needed to connect to the server
33 # Information about the server and the administrator, used by the
34 # ADMIN command. Not required by server but by RFC!
35 ;AdminInfo1 = Description
36 ;AdminInfo2 = Location
37 ;AdminEMail = admin@irc.server
39 # Ports on which the server should listen. There may be more than
40 # one port, separated with ",". (Default: 6667)
41 ;Ports = 6667, 6668, 6669
43 # IP address on which the server should listen. (Default: empty,
44 # so the server listens on all IP addresses of the system)
47 # Text file with the "message of the day" (MOTD). This message will
48 # be shown to all users connecting to the server:
49 ;MotdFile = /usr/local/etc/ngircd.motd
51 # A simple Phrase (<256 chars) if you don't want to use a motd file.
52 # If it is set no MotdFile will be read at all.
53 ;MotdPhrase = "Hello world!"
55 # User ID under which the server should run; you can use the name
56 # of the user or the numerical ID. ATTENTION: For this to work the
57 # server must have been started with root privileges! In addition,
58 # the configuration and MOTD files must be readable by this user,
59 # otherwise RESTART and REHASH won't work!
62 # Group ID under which the ngircd should run; you can use the name
63 # of the group or the numerical ID. ATTENTION: For this to work the
64 # server must have been started with root privileges!
67 # A directory to chroot in when everything is initialized. It
68 # doesn't need to be populated if ngIRCd is compiled as a static
69 # binary. By default ngIRCd won't use the chroot() feature.
70 # ATTENTION: For this to work the server must have been started
71 # with root privileges!
72 ;ChrootDir = /var/empty
74 # This tells ngircd to write its current process id to a file.
75 # Note that the pidfile is written AFTER chroot and switching uid,
76 # i. e. the Directory the pidfile resides in must be writeable by
77 # the ngircd user and exist in the chroot directory.
78 ;PidFile = /var/run/ngircd/ngircd.pid
80 # After <PingTimeout> seconds of inactivity the server will send a
81 # PING to the peer to test whether it is alive or not.
84 # If a client fails to answer a PING with a PONG within <PongTimeout>
85 # seconds, it will be disconnected by the server.
88 # The server tries every <ConnectRetry> seconds to establish a link
89 # to not yet (or no longer) connected servers.
92 # Should IRC Operators be allowed to use the MODE command even if
93 # they are not(!) channel-operators?
96 # Mask IRC Operator mode requests as if they were coming from the
97 # server? (This is a compatibility hack for ircd-irc2 servers)
100 # Allow Pre-Defined Channels only (see Section [Channels])
101 ;PredefChannelsOnly = no
103 # Don't do any DNS lookups when a client connects to the server.
106 # allow both ipv4 and ipv6 clients to connect by opening both
107 # ipv4 and ipv6 sockets
111 # try to connect to other irc servers using ipv4 and ipv6, if possible
115 # Maximum number of simultaneous connection the server is allowed
116 # to accept (0: unlimited):
119 # Maximum number of simultaneous connections from a single IP address
120 # the server will accept (0: unlimited):
121 ;MaxConnectionsIP = 5
123 # Maximum number of channels a user can be member of (0: no limit):
126 # Maximum length of an user nick name (Default: 9, as in RFC 2812).
127 # Please note that all servers in an IRC network MUST use the same
128 # maximum nick name length!
132 # [Operator] sections are used to define IRC Operators. There may be
133 # more than one [Operator] block, one for each local operator.
135 # ID of the operator (may be different of the nick name)
138 # Password of the IRC operator
141 # Optional Mask from which /OPER will be accepted
142 ;Mask = *!ident@somewhere.example.com
145 # More [Operator] sections, if you like ...
148 # Other servers are configured in [Server] sections. If you
149 # configure a port for the connection, then this ngircd tries to
150 # connect to to the other server on the given port; if not it waits
151 # for the other server to connect.
152 # There may be more than one server block, one for each server.
155 # The ngIRCd allows "server groups": You can assign an "ID" to every
156 # server with which you want this ngIRCd to link. If a server of a
157 # group won't answer, the ngIRCd tries to connect to the next server
158 # in the given group. But the ngircd never tries to connect to two
159 # servers with the same group ID.
161 # IRC name of the remote server, must match the "Name" variable in
162 # the [Global] section of the other server (when using ngIRCd).
165 # Internet host name or IP address of the peer (only required when
166 # this server should establish the connection).
167 ;Host = connect-to-host.the.net
169 # IP address to use as _source_ address for the connection. if unspecified,
170 # ngircd will let the operating system pick an address.
173 # Port of the server to which the ngIRCd should connect. If you
174 # assign no port the ngIRCd waits for incoming connections.
177 # Own password for the connection. This password has to be configured
178 # as "PeerPassword" on the other server.
179 ;MyPassword = MySecret
181 # Foreign password for this connection. This password has to be
182 # configured as "MyPassword" on the other server.
183 ;PeerPassword = PeerSecret
185 # Group of this server (optional)
188 # Set the "Passive" option to "yes" if you don't want this ngIRCd to
189 # connect to the configured peer (same as leaving the "Port" variable
190 # empty). The advantage of this option is that you can actually configure
191 # a port an use the IRC command CONNECT more easily to manually connect
192 # this specific server later.
196 # More [Server] sections, if you like ...
199 # Pre-defined channels can be configured in [Channel] sections.
200 # Such channels are created by the server when starting up and even
201 # persist when there are no more members left.
202 # Persistent channels are marked with the mode 'P', which can be set
203 # and unset by IRC operators like other modes on the fly.
204 # There may be more than one [Channel] block, one for each channel.
206 # Name of the channel
209 # Topic for this channel
210 ;Topic = a great topic
212 # Initial channel modes
215 # initial channel password (mode k)
218 # maximum users per channel (mode l)
222 # More [Channel] sections, if you like ...
