commit - 365a1bfc7576a004feeeb6c4d3b2d51ca7f92aa4
commit + 04a5523166073809e7ab911a1fdbe8cd01c2df83
blob - /dev/null
blob + 9338a5b19cc379e652b5c912b71bdee9c6089cd4 (mode 644)
--- /dev/null
+++ uploads/Ipmi/java.security.txt
+#
+# This is the "master security properties file".
+#
+# An alternate java.security properties file may be specified
+# from the command line via the system property
+#
+# -Djava.security.properties=<URL>
+#
+# This properties file appends to the master security properties file.
+# If both properties files specify values for the same key, the value
+# from the command-line properties file is selected, as it is the last
+# one loaded.
+#
+# Also, if you specify
+#
+# -Djava.security.properties==<URL> (2 equals),
+#
+# then that properties file completely overrides the master security
+# properties file.
+#
+# To disable the ability to specify an additional properties file from
+# the command line, set the key security.overridePropertiesFile
+# to false in the master security properties file. It is set to true
+# by default.
+#
+# If this properties file fails to load, the JDK implementation will throw
+# an unspecified error when initializing the java.security.Security class.
+
+# In this file, various security properties are set for use by
+# java.security classes. This is where users can statically register
+# Cryptography Package Providers ("providers" for short). The term
+# "provider" refers to a package or set of packages that supply a
+# concrete implementation of a subset of the cryptography aspects of
+# the Java Security API. A provider may, for example, implement one or
+# more digital signature algorithms or message digest algorithms.
+#
+# Each provider must implement a subclass of the Provider class.
+# To register a provider in this master security properties file,
+# specify the Provider subclass name and priority in the format
+#
+# security.provider.<n>=<className>
+#
+# This declares a provider, and specifies its preference
+# order n. The preference order is the order in which providers are
+# searched for requested algorithms (when no specific provider is
+# requested). The order is 1-based; 1 is the most preferred, followed
+# by 2, and so on.
+#
+# <className> must specify the subclass of the Provider class whose
+# constructor sets the values of various properties that are required
+# for the Java Security API to look up the algorithms or other
+# facilities implemented by the provider.
+#
+# There must be at least one provider specification in java.security.
+# There is a default provider that comes standard with the JDK. It
+# is called the "SUN" provider, and its Provider subclass
+# named Sun appears in the sun.security.provider package. Thus, the
+# "SUN" provider is registered via the following:
+#
+# security.provider.1=sun.security.provider.Sun
+#
+# (The number 1 is used for the default provider.)
+#
+# Note: Providers can be dynamically registered instead by calls to
+# either the addProvider or insertProviderAt method in the Security
+# class.
+
+#
+# List of providers and their preference orders (see above):
+#
+security.provider.1=sun.security.provider.Sun
+security.provider.2=sun.security.rsa.SunRsaSign
+security.provider.3=sun.security.ec.SunEC
+security.provider.4=com.sun.net.ssl.internal.ssl.Provider
+security.provider.5=com.sun.crypto.provider.SunJCE
+security.provider.6=sun.security.jgss.SunProvider
+security.provider.7=com.sun.security.sasl.Provider
+security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI
+security.provider.9=sun.security.smartcardio.SunPCSC
+security.provider.10=sun.security.mscapi.SunMSCAPI
+
+#
+# Support for the here() function
+#
+# This security property determines whether the here() XPath function is
+# supported in XML Signature generation and verification.
+#
+# If this property is set to false, the here() function is not supported.
+# Generating an XML Signature that uses the here() function will throw an
+# XMLSignatureException. Validating an existing XML Signature that uses the
+# here() function will also throw an XMLSignatureException.
+#
+# The default value for this property is true.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+#jdk.xml.dsig.hereFunctionSupported=true
+
+#
+# Sun Provider SecureRandom seed source.
+#
+# Select the primary source of seed data for the "SHA1PRNG" and
+# "NativePRNG" SecureRandom implementations in the "Sun" provider.
+# (Other SecureRandom implementations might also use this property.)
+#
+# On Unix-like systems (for example, Solaris/Linux/MacOS), the
+# "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
+# special device files such as file:/dev/random.
+#
+# On Windows systems, specifying the URLs "file:/dev/random" or
+# "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
+# mechanism for SHA1PRNG.
+#
+# By default, an attempt is made to use the entropy gathering device
+# specified by the "securerandom.source" Security property. If an
+# exception occurs while accessing the specified URL:
+#
+# SHA1PRNG:
+# the traditional system/thread activity algorithm will be used.
+#
+# NativePRNG:
+# a default value of /dev/random will be used. If neither
+# are available, the implementation will be disabled.
+# "file" is the only currently supported protocol type.
+#
+# The entropy gathering device can also be specified with the System
+# property "java.security.egd". For example:
+#
+# % java -Djava.security.egd=file:/dev/random MainClass
+#
+# Specifying this System property will override the
+# "securerandom.source" Security property.
+#
+# In addition, if "file:/dev/random" or "file:/dev/urandom" is
+# specified, the "NativePRNG" implementation will be more preferred than
+# SHA1PRNG in the Sun provider.
+#
+securerandom.source=file:/dev/random
+
+#
+# A list of known strong SecureRandom implementations.
+#
+# To help guide applications in selecting a suitable strong
+# java.security.SecureRandom implementation, Java distributions should
+# indicate a list of known strong implementations using the property.
+#
+# This is a comma-separated list of algorithm and/or algorithm:provider
+# entries.
+#
+securerandom.strongAlgorithms=Windows-PRNG:SunMSCAPI,SHA1PRNG:SUN
+
+#
+# Class to instantiate as the javax.security.auth.login.Configuration
+# provider.
+#
+login.configuration.provider=sun.security.provider.ConfigFile
+
+#
+# Default login configuration file
+#
+#login.config.url.1=file:${user.home}/.java.login.config
+
+#
+# Class to instantiate as the system Policy. This is the name of the class
+# that will be used as the Policy object.
+#
+policy.provider=sun.security.provider.PolicyFile
+
+# The default is to have a single system-wide policy file,
+# and a policy file in the user's home directory.
+policy.url.1=file:${java.home}/lib/security/java.policy
+policy.url.2=file:${user.home}/.java.policy
+
+# whether or not we expand properties in the policy file
+# if this is set to false, properties (${...}) will not be expanded in policy
+# files.
+policy.expandProperties=true
+
+# whether or not we allow an extra policy to be passed on the command line
+# with -Djava.security.policy=somefile. Comment out this line to disable
+# this feature.
+policy.allowSystemProperty=true
+
+# whether or not we look into the IdentityScope for trusted Identities
+# when encountering a 1.1 signed JAR file. If the identity is found
+# and is trusted, we grant it AllPermission.
+policy.ignoreIdentityScope=false
+
+#
+# Default keystore type.
+#
+keystore.type=jks
+
+#
+# Controls compatibility mode for the JKS keystore type.
+#
+# When set to 'true', the JKS keystore type supports loading
+# keystore files in either JKS or PKCS12 format. When set to 'false'
+# it supports loading only JKS keystore files.
+#
+keystore.type.compat=true
+
+#
+# List of comma-separated packages that start with or equal this string
+# will cause a security exception to be thrown when
+# passed to checkPackageAccess unless the
+# corresponding RuntimePermission ("accessClassInPackage."+package) has
+# been granted.
+package.access=sun.,\
+ com.sun.xml.internal.,\
+ com.sun.imageio.,\
+ com.sun.istack.internal.,\
+ com.sun.jmx.,\
+ com.sun.media.sound.,\
+ com.sun.naming.internal.,\
+ com.sun.proxy.,\
+ com.sun.corba.se.,\
+ com.sun.org.apache.bcel.internal.,\
+ com.sun.org.apache.regexp.internal.,\
+ com.sun.org.apache.xerces.internal.,\
+ com.sun.org.apache.xpath.internal.,\
+ com.sun.org.apache.xalan.internal.extensions.,\
+ com.sun.org.apache.xalan.internal.lib.,\
+ com.sun.org.apache.xalan.internal.res.,\
+ com.sun.org.apache.xalan.internal.templates.,\
+ com.sun.org.apache.xalan.internal.utils.,\
+ com.sun.org.apache.xalan.internal.xslt.,\
+ com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
+ com.sun.org.apache.xalan.internal.xsltc.compiler.,\
+ com.sun.org.apache.xalan.internal.xsltc.trax.,\
+ com.sun.org.apache.xalan.internal.xsltc.util.,\
+ com.sun.org.apache.xml.internal.res.,\
+ com.sun.org.apache.xml.internal.resolver.helpers.,\
+ com.sun.org.apache.xml.internal.resolver.readers.,\
+ com.sun.org.apache.xml.internal.security.,\
+ com.sun.org.apache.xml.internal.serializer.utils.,\
+ com.sun.org.apache.xml.internal.utils.,\
+ com.sun.org.glassfish.,\
+ com.oracle.xmlns.internal.,\
+ com.oracle.webservices.internal.,\
+ oracle.jrockit.jfr.,\
+ org.jcp.xml.dsig.internal.,\
+ jdk.internal.,\
+ jdk.nashorn.internal.,\
+ jdk.nashorn.tools.,\
+ jdk.xml.internal.,\
+ com.sun.activation.registries.,\
+ com.sun.java.accessibility.,\
+ com.sun.browser.,\
+ com.sun.glass.,\
+ com.sun.javafx.,\
+ com.sun.media.,\
+ com.sun.openpisces.,\
+ com.sun.prism.,\
+ com.sun.scenario.,\
+ com.sun.t2k.,\
+ com.sun.pisces.,\
+ com.sun.webkit.,\
+ jdk.management.resource.internal.
+
+#
+# List of comma-separated packages that start with or equal this string
+# will cause a security exception to be thrown when
+# passed to checkPackageDefinition unless the
+# corresponding RuntimePermission ("defineClassInPackage."+package) has
+# been granted.
+#
+# by default, none of the class loaders supplied with the JDK call
+# checkPackageDefinition.
+#
+package.definition=sun.,\
+ com.sun.xml.internal.,\
+ com.sun.imageio.,\
+ com.sun.istack.internal.,\
+ com.sun.jmx.,\
+ com.sun.media.sound.,\
+ com.sun.naming.internal.,\
+ com.sun.proxy.,\
+ com.sun.corba.se.,\
+ com.sun.org.apache.bcel.internal.,\
+ com.sun.org.apache.regexp.internal.,\
+ com.sun.org.apache.xerces.internal.,\
+ com.sun.org.apache.xpath.internal.,\
+ com.sun.org.apache.xalan.internal.extensions.,\
+ com.sun.org.apache.xalan.internal.lib.,\
+ com.sun.org.apache.xalan.internal.res.,\
+ com.sun.org.apache.xalan.internal.templates.,\
+ com.sun.org.apache.xalan.internal.utils.,\
+ com.sun.org.apache.xalan.internal.xslt.,\
+ com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
+ com.sun.org.apache.xalan.internal.xsltc.compiler.,\
+ com.sun.org.apache.xalan.internal.xsltc.trax.,\
+ com.sun.org.apache.xalan.internal.xsltc.util.,\
+ com.sun.org.apache.xml.internal.res.,\
+ com.sun.org.apache.xml.internal.resolver.helpers.,\
+ com.sun.org.apache.xml.internal.resolver.readers.,\
+ com.sun.org.apache.xml.internal.security.,\
+ com.sun.org.apache.xml.internal.serializer.utils.,\
+ com.sun.org.apache.xml.internal.utils.,\
+ com.sun.org.glassfish.,\
+ com.oracle.xmlns.internal.,\
+ com.oracle.webservices.internal.,\
+ oracle.jrockit.jfr.,\
+ org.jcp.xml.dsig.internal.,\
+ jdk.internal.,\
+ jdk.nashorn.internal.,\
+ jdk.nashorn.tools.,\
+ jdk.xml.internal.,\
+ com.sun.activation.registries.,\
+ com.sun.java.accessibility.,\
+ com.sun.browser.,\
+ com.sun.glass.,\
+ com.sun.javafx.,\
+ com.sun.media.,\
+ com.sun.openpisces.,\
+ com.sun.prism.,\
+ com.sun.scenario.,\
+ com.sun.t2k.,\
+ com.sun.pisces.,\
+ com.sun.webkit.,\
+ jdk.management.resource.internal.
+
+#
+# Determines whether this properties file can be appended to
+# or overridden on the command line via -Djava.security.properties
+#
+security.overridePropertiesFile=true
+
+#
+# Determines the default key and trust manager factory algorithms for
+# the javax.net.ssl package.
+#
+ssl.KeyManagerFactory.algorithm=SunX509
+ssl.TrustManagerFactory.algorithm=PKIX
+
+#
+# The Java-level namelookup cache policy for successful lookups:
+#
+# any negative value: caching forever
+# any positive value: the number of seconds to cache an address for
+# zero: do not cache
+#
+# default value is forever (FOREVER). For security reasons, this
+# caching is made forever when a security manager is set. When a security
+# manager is not set, the default behavior in this implementation
+# is to cache for 30 seconds.
+#
+# NOTE: setting this to anything other than the default value can have
+# serious security implications. Do not set it unless
+# you are sure you are not exposed to DNS spoofing attack.
+#
+#networkaddress.cache.ttl=-1
+
+# The Java-level namelookup cache policy for failed lookups:
+#
+# any negative value: cache forever
+# any positive value: the number of seconds to cache negative lookup results
+# zero: do not cache
+#
+# In some Microsoft Windows networking environments that employ
+# the WINS name service in addition to DNS, name service lookups
+# that fail may take a noticeably long time to return (approx. 5 seconds).
+# For this reason the default caching policy is to maintain these
+# results for 10 seconds.
+#
+#
+networkaddress.cache.negative.ttl=10
+
+#
+# Properties to configure OCSP for certificate revocation checking
+#
+
+# Enable OCSP
+#
+# By default, OCSP is not used for certificate revocation checking.
+# This property enables the use of OCSP when set to the value "true".
+#
+# NOTE: SocketPermission is required to connect to an OCSP responder.
+#
+# Example,
+# ocsp.enable=true
+
+#
+# Location of the OCSP responder
+#
+# By default, the location of the OCSP responder is determined implicitly
+# from the certificate being validated. This property explicitly specifies
+# the location of the OCSP responder. The property is used when the
+# Authority Information Access extension (defined in RFC 3280) is absent
+# from the certificate or when it requires overriding.
+#
+# Example,
+# ocsp.responderURL=http://ocsp.example.net:80
+
+#
+# Subject name of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# distinguished name (defined in RFC 2253) which identifies a certificate in
+# the set of certificates supplied during cert path validation. In cases where
+# the subject name alone is not sufficient to uniquely identify the certificate
+# then both the "ocsp.responderCertIssuerName" and
+# "ocsp.responderCertSerialNumber" properties must be used instead. When this
+# property is set then those two properties are ignored.
+#
+# Example,
+# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
+
+#
+# Issuer name of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# distinguished name (defined in RFC 2253) which identifies a certificate in
+# the set of certificates supplied during cert path validation. When this
+# property is set then the "ocsp.responderCertSerialNumber" property must also
+# be set. When the "ocsp.responderCertSubjectName" property is set then this
+# property is ignored.
+#
+# Example,
+# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
+
+#
+# Serial number of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# of hexadecimal digits (colon or space separators may be present) which
+# identifies a certificate in the set of certificates supplied during cert path
+# validation. When this property is set then the "ocsp.responderCertIssuerName"
+# property must also be set. When the "ocsp.responderCertSubjectName" property
+# is set then this property is ignored.
+#
+# Example,
+# ocsp.responderCertSerialNumber=2A:FF:00
+
+#
+# Policy for failed Kerberos KDC lookups:
+#
+# When a KDC is unavailable (network error, service failure, etc), it is
+# put inside a blacklist and accessed less often for future requests. The
+# value (case-insensitive) for this policy can be:
+#
+# tryLast
+# KDCs in the blacklist are always tried after those not on the list.
+#
+# tryLess[:max_retries,timeout]
+# KDCs in the blacklist are still tried by their order in the configuration,
+# but with smaller max_retries and timeout values. max_retries and timeout
+# are optional numerical parameters (default 1 and 5000, which means once
+# and 5 seconds). Please notes that if any of the values defined here is
+# more than what is defined in krb5.conf, it will be ignored.
+#
+# Whenever a KDC is detected as available, it is removed from the blacklist.
+# The blacklist is reset when krb5.conf is reloaded. You can add
+# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
+# reloaded whenever a JAAS authentication is attempted.
+#
+# Example,
+# krb5.kdc.bad.policy = tryLast
+# krb5.kdc.bad.policy = tryLess:2,2000
+krb5.kdc.bad.policy = tryLast
+
+#
+# This property contains a list of disabled EC Named Curves that can be included
+# in the jdk.[tls|certpath|jar].disabledAlgorithms properties. To include this
+# list in any of the disabledAlgorithms properties, add the property name as
+# an entry.
+jdk.disabled.namedCurves = secp112r1, secp112r2, secp128r1, secp128r2, \
+ secp160k1, secp160r1, secp160r2, secp192k1, secp192r1, secp224k1, \
+ secp224r1, secp256k1, sect113r1, sect113r2, sect131r1, sect131r2, \
+ sect163k1, sect163r1, sect163r2, sect193r1, sect193r2, sect233k1, \
+ sect233r1, sect239k1, sect283k1, sect283r1, sect409k1, sect409r1, \
+ sect571k1, sect571r1, X9.62 c2tnb191v1, X9.62 c2tnb191v2, \
+ X9.62 c2tnb191v3, X9.62 c2tnb239v1, X9.62 c2tnb239v2, X9.62 c2tnb239v3, \
+ X9.62 c2tnb359v1, X9.62 c2tnb431r1, X9.62 prime192v2, X9.62 prime192v3, \
+ X9.62 prime239v1, X9.62 prime239v2, X9.62 prime239v3, brainpoolP256r1, \
+ brainpoolP320r1, brainpoolP384r1, brainpoolP512r1
+
+#
+# Kerberos cross-realm referrals (RFC 6806)
+#
+# OpenJDK's Kerberos client supports cross-realm referrals as defined in
+# RFC 6806. This allows to setup more dynamic environments in which clients
+# do not need to know in advance how to reach the realm of a target principal
+# (either a user or service).
+#
+# When a client issues an AS or a TGS request, the "canonicalize" option
+# is set to announce support of this feature. A KDC server may fulfill the
+# request or reply referring the client to a different one. If referred,
+# the client will issue a new request and the cycle repeats.
+#
+# In addition to referrals, the "canonicalize" option allows the KDC server
+# to change the client name in response to an AS request. For security reasons,
+# RFC 6806 (section 11) FAST scheme is enforced.
+#
+# Disable Kerberos cross-realm referrals. Value may be overwritten with a
+# System property (-Dsun.security.krb5.disableReferrals).
+sun.security.krb5.disableReferrals=false
+
+# Maximum number of AS or TGS referrals to avoid infinite loops. Value may
+# be overwritten with a System property (-Dsun.security.krb5.maxReferrals).
+sun.security.krb5.maxReferrals=5
+
+#
+# Algorithm restrictions for certification path (CertPath) processing
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# for certification path building and validation. For example, "MD2" is
+# generally no longer considered to be a secure hash algorithm. This section
+# describes the mechanism for disabling algorithms based on algorithm name
+# and/or key length. This includes algorithms used in certificates, as well
+# as revocation information such as CRLs and signed OCSP Responses.
+# The syntax of the disabled algorithm string is described as follows:
+# DisabledAlgorithms:
+# " DisabledAlgorithm { , DisabledAlgorithm } "
+#
+# DisabledAlgorithm:
+# AlgorithmName [Constraint] { '&' Constraint } | IncludeProperty
+#
+# AlgorithmName:
+# (see below)
+#
+# Constraint:
+# KeySizeConstraint | CAConstraint | DenyAfterConstraint |
+# UsageConstraint
+#
+# KeySizeConstraint:
+# keySize Operator KeyLength
+#
+# Operator:
+# <= | < | == | != | >= | >
+#
+# KeyLength:
+# Integer value of the algorithm's key length in bits
+#
+# CAConstraint:
+# jdkCA
+#
+# DenyAfterConstraint:
+# denyAfter YYYY-MM-DD
+#
+# UsageConstraint:
+# usage [TLSServer] [TLSClient] [SignedJAR]
+#
+# IncludeProperty:
+# include <security property>
+#
+# The "AlgorithmName" is the standard algorithm name of the disabled
+# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
+# Documentation" for information about Standard Algorithm Names. Matching
+# is performed using a case-insensitive sub-element matching rule. (For
+# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
+# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
+# sub-element of the certificate algorithm name, the algorithm will be
+# rejected during certification path building and validation. For example,
+# the assertion algorithm name "DSA" will disable all certificate algorithms
+# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
+# will not disable algorithms related to "ECDSA".
+#
+# The "IncludeProperty" allows a implementation-defined security property that
+# can be included in the disabledAlgorithms properties. These properties are
+# to help manage common actions easier across multiple disabledAlgorithm
+# properties.
+# There is one defined security property: jdk.disabled.NamedCurves
+# See the property for more specific details.
+#
+#
+# A "Constraint" defines restrictions on the keys and/or certificates for
+# a specified AlgorithmName:
+#
+# KeySizeConstraint:
+# keySize Operator KeyLength
+# The constraint requires a key of a valid size range if the
+# "AlgorithmName" is of a key algorithm. The "KeyLength" indicates
+# the key size specified in number of bits. For example,
+# "RSA keySize <= 1024" indicates that any RSA key with key size less
+# than or equal to 1024 bits should be disabled, and
+# "RSA keySize < 1024, RSA keySize > 2048" indicates that any RSA key
+# with key size less than 1024 or greater than 2048 should be disabled.
+# This constraint is only used on algorithms that have a key size.
+#
+# CAConstraint:
+# jdkCA
+# This constraint prohibits the specified algorithm only if the
+# algorithm is used in a certificate chain that terminates at a marked
+# trust anchor in the lib/security/cacerts keystore. If the jdkCA
+# constraint is not set, then all chains using the specified algorithm
+# are restricted. jdkCA may only be used once in a DisabledAlgorithm
+# expression.
+# Example: To apply this constraint to SHA-1 certificates, include
+# the following: "SHA1 jdkCA"
+#
+# DenyAfterConstraint:
+# denyAfter YYYY-MM-DD
+# This constraint prohibits a certificate with the specified algorithm
+# from being used after the date regardless of the certificate's
+# validity. JAR files that are signed and timestamped before the
+# constraint date with certificates containing the disabled algorithm
+# will not be restricted. The date is processed in the UTC timezone.
+# This constraint can only be used once in a DisabledAlgorithm
+# expression.
+# Example: To deny usage of RSA 2048 bit certificates after Feb 3 2020,
+# use the following: "RSA keySize == 2048 & denyAfter 2020-02-03"
+#
+# UsageConstraint:
+# usage [TLSServer] [TLSClient] [SignedJAR]
+# This constraint prohibits the specified algorithm for
+# a specified usage. This should be used when disabling an algorithm
+# for all usages is not practical. 'TLSServer' restricts the algorithm
+# in TLS server certificate chains when server authentication is
+# performed. 'TLSClient' restricts the algorithm in TLS client
+# certificate chains when client authentication is performed.
+# 'SignedJAR' constrains use of certificates in signed jar files.
+# The usage type follows the keyword and more than one usage type can
+# be specified with a whitespace delimiter.
+# Example: "SHA1 usage TLSServer TLSClient"
+#
+# When an algorithm must satisfy more than one constraint, it must be
+# delimited by an ampersand '&'. For example, to restrict certificates in a
+# chain that terminate at a distribution provided trust anchor and contain
+# RSA keys that are less than or equal to 1024 bits, add the following
+# constraint: "RSA keySize <= 1024 & jdkCA".
+#
+# All DisabledAlgorithms expressions are processed in the order defined in the
+# property. This requires lower keysize constraints to be specified
+# before larger keysize constraints of the same algorithm. For example:
+# "RSA keySize < 1024 & jdkCA, RSA keySize < 2048".
+#
+# Note: The algorithm restrictions do not apply to trust anchors or
+# self-signed certificates.
+#
+# Note: This property is currently used by Oracle's PKIX implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
+#
+#
+###jdk.certpath.disabledAlgorithms=MD2, MD5, SHA1 jdkCA & usage TLSServer, \
+### RSA keySize < 1024, DSA keySize < 1024, EC keySize < 224, \
+### include jdk.disabled.namedCurves, \
+### SHA1 usage SignedJAR & denyAfter 2019-01-01
+###
+#
+# Legacy algorithms for certification path (CertPath) processing and
+# signed JAR files.
+#
+# In some environments, a certain algorithm or key length may be undesirable
+# but is not yet disabled.
+#
+# Tools such as keytool and jarsigner may emit warnings when these legacy
+# algorithms are used. See the man pages for those tools for more information.
+#
+# The syntax is the same as the "jdk.certpath.disabledAlgorithms" and
+# "jdk.jar.disabledAlgorithms" security properties.
+#
+# Note: This property is currently used by the JDK Reference
+# implementation. It is not guaranteed to be examined and used by other
+# implementations.
+
+jdk.security.legacyAlgorithms=SHA1, \
+ RSA keySize < 2048, DSA keySize < 2048
+
+#
+# Algorithm restrictions for signed JAR files
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# for signed JAR validation. For example, "MD2" is generally no longer
+# considered to be a secure hash algorithm. This section describes the
+# mechanism for disabling algorithms based on algorithm name and/or key length.
+# JARs signed with any of the disabled algorithms or key sizes will be treated
+# as unsigned.
+#
+# The syntax of the disabled algorithm string is described as follows:
+# DisabledAlgorithms:
+# " DisabledAlgorithm { , DisabledAlgorithm } "
+#
+# DisabledAlgorithm:
+# AlgorithmName [Constraint] { '&' Constraint }
+#
+# AlgorithmName:
+# (see below)
+#
+# Constraint:
+# KeySizeConstraint | DenyAfterConstraint
+#
+# KeySizeConstraint:
+# keySize Operator KeyLength
+#
+# DenyAfterConstraint:
+# denyAfter YYYY-MM-DD
+#
+# Operator:
+# <= | < | == | != | >= | >
+#
+# KeyLength:
+# Integer value of the algorithm's key length in bits
+#
+# Note: This property is currently used by the JDK Reference
+# implementation. It is not guaranteed to be examined and used by other
+# implementations.
+#
+# See "jdk.certpath.disabledAlgorithms" for syntax descriptions.
+#
+###jdk.jar.disabledAlgorithms=MD2, MD5, RSA keySize < 1024, \
+### DSA keySize < 1024, include jdk.disabled.namedCurves, \
+### SHA1 denyAfter 2019-01-01
+###
+#
+# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
+# (SSL/TLS) processing
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# when using SSL/TLS. This section describes the mechanism for disabling
+# algorithms during SSL/TLS security parameters negotiation, including
+# protocol version negotiation, cipher suites selection, signature schemes
+# selection, peer authentication and key exchange mechanisms.
+#
+# Disabled algorithms will not be negotiated for SSL/TLS connections, even
+# if they are enabled explicitly in an application.
+#
+# For PKI-based peer authentication and key exchange mechanisms, this list
+# of disabled algorithms will also be checked during certification path
+# building and validation, including algorithms used in certificates, as
+# well as revocation information such as CRLs and signed OCSP Responses.
+# This is in addition to the jdk.certpath.disabledAlgorithms property above.
+#
+# See the specification of "jdk.certpath.disabledAlgorithms" for the
+# syntax of the disabled algorithm string.
+#
+# Note: The algorithm restrictions do not apply to trust anchors or
+# self-signed certificates.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+# jdk.tls.disabledAlgorithms=MD5, SSLv3, DSA, RSA keySize < 2048, \
+# rsa_pkcs1_sha1
+jdk.tls.disabledAlgorithms=SSLv3, TLSv1, TLSv1.1, RC4, DES, MD5withRSA, \
+ DH keySize < 1024, EC keySize < 224, 3DES_EDE_CBC, anon, NULL, \
+ include jdk.disabled.namedCurves
+
+# Legacy algorithms for Secure Socket Layer/Transport Layer Security (SSL/TLS)
+# processing in JSSE implementation.
+#
+# In some environments, a certain algorithm may be undesirable but it
+# cannot be disabled because of its use in legacy applications. Legacy
+# algorithms may still be supported, but applications should not use them
+# as the security strength of legacy algorithms are usually not strong enough
+# in practice.
+#
+# During SSL/TLS security parameters negotiation, legacy algorithms will
+# not be negotiated unless there are no other candidates.
+#
+# The syntax of the legacy algorithms string is described as this Java
+# BNF-style:
+# LegacyAlgorithms:
+# " LegacyAlgorithm { , LegacyAlgorithm } "
+#
+# LegacyAlgorithm:
+# AlgorithmName (standard JSSE algorithm name)
+#
+# See the specification of security property "jdk.certpath.disabledAlgorithms"
+# for the syntax and description of the "AlgorithmName" notation.
+#
+# Per SSL/TLS specifications, cipher suites have the form:
+# SSL_KeyExchangeAlg_WITH_CipherAlg_MacAlg
+# or
+# TLS_KeyExchangeAlg_WITH_CipherAlg_MacAlg
+#
+# For example, the cipher suite TLS_RSA_WITH_AES_128_CBC_SHA uses RSA as the
+# key exchange algorithm, AES_128_CBC (128 bits AES cipher algorithm in CBC
+# mode) as the cipher (encryption) algorithm, and SHA-1 as the message digest
+# algorithm for HMAC.
+#
+# The LegacyAlgorithm can be one of the following standard algorithm names:
+# 1. JSSE cipher suite name, e.g., TLS_RSA_WITH_AES_128_CBC_SHA
+# 2. JSSE key exchange algorithm name, e.g., RSA
+# 3. JSSE cipher (encryption) algorithm name, e.g., AES_128_CBC
+# 4. JSSE message digest algorithm name, e.g., SHA
+#
+# See SSL/TLS specifications and "Java Cryptography Architecture Standard
+# Algorithm Name Documentation" for information about the algorithm names.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+# There is no guarantee the property will continue to exist or be of the
+# same syntax in future releases.
+#
+# Example:
+# jdk.tls.legacyAlgorithms=DH_anon, DES_CBC, SSL_RSA_WITH_RC4_128_MD5
+#
+jdk.tls.legacyAlgorithms= \
+ K_NULL, C_NULL, M_NULL, \
+ DH_anon, ECDH_anon, \
+ RC4_128, RC4_40, DES_CBC, DES40_CBC, \
+ 3DES_EDE_CBC
+
+# The pre-defined default finite field Diffie-Hellman ephemeral (DHE)
+# parameters for Transport Layer Security (SSL/TLS/DTLS) processing.
+#
+# In traditional SSL/TLS/DTLS connections where finite field DHE parameters
+# negotiation mechanism is not used, the server offers the client group
+# parameters, base generator g and prime modulus p, for DHE key exchange.
+# It is recommended to use dynamic group parameters. This property defines
+# a mechanism that allows you to specify custom group parameters.
+#
+# The syntax of this property string is described as this Java BNF-style:
+# DefaultDHEParameters:
+# DefinedDHEParameters { , DefinedDHEParameters }
+#
+# DefinedDHEParameters:
+# "{" DHEPrimeModulus , DHEBaseGenerator "}"
+#
+# DHEPrimeModulus:
+# HexadecimalDigits
+#
+# DHEBaseGenerator:
+# HexadecimalDigits
+#
+# HexadecimalDigits:
+# HexadecimalDigit { HexadecimalDigit }
+#
+# HexadecimalDigit: one of
+# 0 1 2 3 4 5 6 7 8 9 A B C D E F a b c d e f
+#
+# Whitespace characters are ignored.
+#
+# The "DefinedDHEParameters" defines the custom group parameters, prime
+# modulus p and base generator g, for a particular size of prime modulus p.
+# The "DHEPrimeModulus" defines the hexadecimal prime modulus p, and the
+# "DHEBaseGenerator" defines the hexadecimal base generator g of a group
+# parameter. It is recommended to use safe primes for the custom group
+# parameters.
+#
+# If this property is not defined or the value is empty, the underlying JSSE
+# provider's default group parameter is used for each connection.
+#
+# If the property value does not follow the grammar, or a particular group
+# parameter is not valid, the connection will fall back and use the
+# underlying JSSE provider's default group parameter.
+#
+# Note: This property is currently used by OpenJDK's JSSE implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+# jdk.tls.server.defaultDHEParameters=
+# { \
+# FFFFFFFF FFFFFFFF C90FDAA2 2168C234 C4C6628B 80DC1CD1 \
+# 29024E08 8A67CC74 020BBEA6 3B139B22 514A0879 8E3404DD \
+# EF9519B3 CD3A431B 302B0A6D F25F1437 4FE1356D 6D51C245 \
+# E485B576 625E7EC6 F44C42E9 A637ED6B 0BFF5CB6 F406B7ED \
+# EE386BFB 5A899FA5 AE9F2411 7C4B1FE6 49286651 ECE65381 \
+# FFFFFFFF FFFFFFFF, 2}
+
+#
+# TLS key limits on symmetric cryptographic algorithms
+#
+# This security property sets limits on algorithms key usage in TLS 1.3.
+# When the amount of data encrypted exceeds the algorithm value listed below,
+# a KeyUpdate message will trigger a key change. This is for symmetric ciphers
+# with TLS 1.3 only.
+#
+# The syntax for the property is described below:
+# KeyLimits:
+# " KeyLimit { , KeyLimit } "
+#
+# WeakKeyLimit:
+# AlgorithmName Action Length
+#
+# AlgorithmName:
+# A full algorithm transformation.
+#
+# Action:
+# KeyUpdate
+#
+# Length:
+# The amount of encrypted data in a session before the Action occurs
+# This value may be an integer value in bytes, or as a power of two, 2^29.
+#
+# KeyUpdate:
+# The TLS 1.3 KeyUpdate handshake process begins when the Length amount
+# is fulfilled.
+#
+# Note: This property is currently used by OpenJDK's JSSE implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+jdk.tls.keyLimits=AES/GCM/NoPadding KeyUpdate 2^37
+
+#
+# Cryptographic Jurisdiction Policy defaults
+#
+# Import and export control rules on cryptographic software vary from
+# country to country. By default, the JDK provides two different sets of
+# cryptographic policy files:
+#
+# unlimited: These policy files contain no restrictions on cryptographic
+# strengths or algorithms.
+#
+# limited: These policy files contain more restricted cryptographic
+# strengths, and are still available if your country or
+# usage requires the traditional restrictive policy.
+#
+# The JDK JCE framework uses the unlimited policy files by default.
+# However the user may explicitly choose a set either by defining the
+# "crypto.policy" Security property or by installing valid JCE policy
+# jar files into the traditional JDK installation location. To better
+# support older JDK Update releases, the "crypto.policy" property is not
+# defined by default. See below for more information.
+#
+# The following logic determines which policy files are used:
+#
+# <java-home> refers to the directory where the JRE was
+# installed and may be determined using the "java.home"
+# System property.
+#
+# 1. If the Security property "crypto.policy" has been defined,
+# then the following mechanism is used:
+#
+# The policy files are stored as jar files in subdirectories of
+# <java-home>/lib/security/policy. Each directory contains a complete
+# set of policy files.
+#
+# The "crypto.policy" Security property controls the directory
+# selection, and thus the effective cryptographic policy.
+#
+# The default set of directories is:
+#
+# limited | unlimited
+#
+# 2. If the "crypto.policy" property is not set and the traditional
+# US_export_policy.jar and local_policy.jar files
+# (e.g. limited/unlimited) are found in the legacy
+# <java-home>/lib/security directory, then the rules embedded within
+# those jar files will be used. This helps preserve compatibility
+# for users upgrading from an older installation.
+#
+# 3. If the jar files are not present in the legacy location
+# and the "crypto.policy" Security property is not defined,
+# then the JDK will use the unlimited settings (equivalent to
+# crypto.policy=unlimited)
+#
+# Please see the JCA documentation for additional information on these
+# files and formats.
+#
+# YOU ARE ADVISED TO CONSULT YOUR EXPORT/IMPORT CONTROL COUNSEL OR ATTORNEY
+# TO DETERMINE THE EXACT REQUIREMENTS.
+#
+# Please note that the JCE for Java SE, including the JCE framework,
+# cryptographic policy files, and standard JCE providers provided with
+# the Java SE, have been reviewed and approved for export as mass market
+# encryption item by the US Bureau of Industry and Security.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+#crypto.policy=unlimited
+
+#
+# The policy for the XML Signature secure validation mode. Validation of
+# XML Signatures that violate any of these constraints will fail.
+# The mode can be enabled or disabled by setting the property
+# "org.jcp.xml.dsig.secureValidation" to Boolean.TRUE or Boolean.FALSE with
+# the javax.xml.crypto.XMLCryptoContext.setProperty() method, or by setting
+# the system property "org.jcp.xml.dsig.secureValidation" to "true" or
+# "false". Any other value for the system property is also treated as "false".
+# If the system property is set, it supersedes the XMLCryptoContext property
+# value.
+#
+# The secure validation mode is enabled by default if you are running code with
+# a SecurityManager, otherwise it is disabled by default.
+#
+# Policy:
+# Constraint {"," Constraint }
+# Constraint:
+# AlgConstraint | MaxTransformsConstraint | MaxReferencesConstraint |
+# ReferenceUriSchemeConstraint | KeySizeConstraint | OtherConstraint
+# AlgConstraint
+# "disallowAlg" Uri
+# MaxTransformsConstraint:
+# "maxTransforms" Integer
+# MaxReferencesConstraint:
+# "maxReferences" Integer
+# ReferenceUriSchemeConstraint:
+# "disallowReferenceUriSchemes" String { String }
+# KeySizeConstraint:
+# "minKeySize" KeyAlg Integer
+# OtherConstraint:
+# "noDuplicateIds" | "noRetrievalMethodLoops"
+#
+# For AlgConstraint, Uri is the algorithm URI String that is not allowed.
+# See the XML Signature Recommendation for more information on algorithm
+# URI Identifiers. For KeySizeConstraint, KeyAlg is the standard algorithm
+# name of the key type (ex: "RSA"). If the MaxTransformsConstraint,
+# MaxReferencesConstraint or KeySizeConstraint (for the same key type) is
+# specified more than once, only the last entry is enforced.
+#
+# Note: This property is currently used by the JDK Reference implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+jdk.xml.dsig.secureValidationPolicy=\
+ disallowAlg http://www.w3.org/TR/1999/REC-xslt-19991116,\
+ disallowAlg http://www.w3.org/2001/04/xmldsig-more#rsa-md5,\
+ disallowAlg http://www.w3.org/2001/04/xmldsig-more#hmac-md5,\
+ disallowAlg http://www.w3.org/2001/04/xmldsig-more#md5,\
+ maxTransforms 5,\
+ maxReferences 30,\
+ disallowReferenceUriSchemes file http https,\
+ minKeySize RSA 1024,\
+ minKeySize DSA 1024,\
+ minKeySize EC 224,\
+ noDuplicateIds,\
+ noRetrievalMethodLoops
+
+#
+# Deserialization system-wide filter factory
+#
+# A filter factory class name is used to configure the system-wide filter factory.
+# The filter factory selects the sun.misc.ObjectInputFilter to use for each
+# ObjectInputStream when invoked with a current and a requested filter.
+# The class must be public, must have a public zero-argument constructor, implement the
+# java.util.function.BinaryOperator<sun.misc.ObjectInputFilter> interface,
+# provide its implementation and be accessible via the application class loader.
+# See the release notes for more details.
+#
+# If the system property jdk.serialFilterFactory is also specified, it supersedes
+# the security property value defined here.
+#
+#jdk.serialFilterFactory=<classname>
+
+#
+# Serialization process-wide filter
+#
+# A filter, if configured, is used by java.io.ObjectInputStream during
+# deserialization to check the contents of the stream.
+# A filter is configured as a sequence of patterns, each pattern is either
+# matched against the name of a class in the stream or defines a limit.
+# Patterns are separated by ";" (semicolon).
+# Whitespace is significant and is considered part of the pattern.
+#
+# If the system property jdk.serialFilter is also specified on the command
+# line, it supersedes the security property value defined here.
+#
+# If a pattern includes a "=", it sets a limit.
+# If a limit appears more than once the last value is used.
+# Limits are checked before classes regardless of the order in the sequence of patterns.
+# If any of the limits are exceeded, the filter status is REJECTED.
+#
+# maxdepth=value - the maximum depth of a graph
+# maxrefs=value - the maximum number of internal references
+# maxbytes=value - the maximum number of bytes in the input stream
+# maxarray=value - the maximum array length allowed
+#
+# Other patterns, from left to right, match the class or package name as
+# returned from Class.getName.
+# If the class is an array type, the class or package to be matched is the element type.
+# Arrays of any number of dimensions are treated the same as the element type.
+# For example, a pattern of "!example.Foo", rejects creation of any instance or
+# array of example.Foo.
+#
+# If the pattern starts with "!", the status is REJECTED if the remaining pattern
+# is matched; otherwise the status is ALLOWED if the pattern matches.
+# If the pattern ends with ".**" it matches any class in the package and all subpackages.
+# If the pattern ends with ".*" it matches any class in the package.
+# If the pattern ends with "*", it matches any class with the pattern as a prefix.
+# If the pattern is equal to the class name, it matches.
+# Otherwise, the status is UNDECIDED.
+#
+#jdk.serialFilter=pattern;pattern
+
+#
+# RMI Registry Serial Filter
+#
+# The filter pattern uses the same format as jdk.serialFilter.
+# This filter can override the builtin filter if additional types need to be
+# allowed or rejected from the RMI Registry or to decrease limits but not
+# to increase limits.
+# If the limits (maxdepth, maxrefs, or maxbytes) are exceeded, the object is rejected.
+#
+# Each non-array type is allowed or rejected if it matches one of the patterns,
+# evaluated from left to right, and is otherwise allowed. Arrays of any
+# component type, including subarrays and arrays of primitives, are allowed.
+#
+# Array construction of any component type, including subarrays and arrays of
+# primitives, are allowed unless the length is greater than the maxarray limit.
+# The filter is applied to each array element.
+#
+# The built-in filter allows subclasses of allowed classes and
+# can approximately be represented as the pattern:
+#
+#sun.rmi.registry.registryFilter=\
+# maxarray=1000000;\
+# maxdepth=20;\
+# java.lang.String;\
+# java.lang.Number;\
+# java.lang.reflect.Proxy;\
+# java.rmi.Remote;\
+# sun.rmi.server.UnicastRef;\
+# sun.rmi.server.RMIClientSocketFactory;\
+# sun.rmi.server.RMIServerSocketFactory;\
+# java.rmi.activation.ActivationID;\
+# java.rmi.server.UID
+#
+# RMI Distributed Garbage Collector (DGC) Serial Filter
+#
+# The filter pattern uses the same format as jdk.serialFilter.
+# This filter can override the builtin filter if additional types need to be
+# allowed or rejected from the RMI DGC.
+#
+# The builtin DGC filter can approximately be represented as the filter pattern:
+#
+#sun.rmi.transport.dgcFilter=\
+# java.rmi.server.ObjID;\
+# java.rmi.server.UID;\
+# java.rmi.dgc.VMID;\
+# java.rmi.dgc.Lease;\
+# maxdepth=5;maxarray=10000
+
+# CORBA ORBIorTypeCheckRegistryFilter
+# Type check enhancement for ORB::string_to_object processing
+#
+# An IOR type check filter, if configured, is used by an ORB during
+# an ORB::string_to_object invocation to check the veracity of the type encoded
+# in the ior string.
+#
+# The filter pattern consists of a semi-colon separated list of class names.
+# The configured list contains the binary class names of the IDL interface types
+# corresponding to the IDL stub class to be instantiated.
+# As such, a filter specifies a list of IDL stub classes that will be
+# allowed by an ORB when an ORB::string_to_object is invoked.
+# It is used to specify a white list configuration of acceptable
+# IDL stub types which may be contained in a stringified IOR
+# parameter passed as input to an ORB::string_to_object method.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+#com.sun.CORBA.ORBIorTypeCheckRegistryFilter=binary_class_name;binary_class_name
+
+#
+# JCEKS Encrypted Key Serial Filter
+#
+# This filter, if configured, is used by the JCEKS KeyStore during the
+# deserialization of the encrypted Key object stored inside a key entry.
+# If not configured or the filter result is UNDECIDED (i.e. none of the patterns
+# matches), the filter configured by jdk.serialFilter will be consulted.
+#
+# If the system property jceks.key.serialFilter is also specified, it supersedes
+# the security property value defined here.
+#
+# The filter pattern uses the same format as jdk.serialFilter. The default
+# pattern allows java.lang.Enum, java.security.KeyRep, java.security.KeyRep$Type,
+# and javax.crypto.spec.SecretKeySpec and rejects all the others.
+jceks.key.serialFilter = java.lang.Enum;java.security.KeyRep;\
+ java.security.KeyRep$Type;javax.crypto.spec.SecretKeySpec;!*
+
+#
+# Disabled mechanisms for the Simple Authentication and Security Layer (SASL)
+#
+# Disabled mechanisms will not be negotiated by both SASL clients and servers.
+# These mechanisms will be ignored if they are specified in the "mechanisms"
+# argument of "Sasl.createSaslClient" or the "mechanism" argument of
+# "Sasl.createSaslServer".
+#
+# The value of this property is a comma-separated list of SASL mechanisms.
+# The mechanisms are case-sensitive. Whitespaces around the commas are ignored.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+# jdk.sasl.disabledMechanisms=PLAIN, CRAM-MD5, DIGEST-MD5
+jdk.sasl.disabledMechanisms=
+
+#
+# Policies for distrusting Certificate Authorities (CAs).
+#
+# This is a comma separated value of one or more case-sensitive strings, each
+# of which represents a policy for determining if a CA should be distrusted.
+# The supported values are:
+#
+# SYMANTEC_TLS : Distrust TLS Server certificates anchored by a Symantec
+# root CA and issued after April 16, 2019 unless issued by one of the
+# following subordinate CAs which have a later distrust date:
+# 1. Apple IST CA 2 - G1, SHA-256 fingerprint:
+# AC2B922ECFD5E01711772FEA8ED372DE9D1E2245FCE3F57A9CDBEC77296A424B
+# Distrust after December 31, 2019.
+# 2. Apple IST CA 8 - G1, SHA-256 fingerprint:
+# A4FE7C7F15155F3F0AEF7AAA83CF6E06DEB97CA3F909DF920AC1490882D488ED
+# Distrust after December 31, 2019.
+#
+# Leading and trailing whitespace surrounding each value are ignored.
+# Unknown values are ignored. If the property is commented out or set to the
+# empty String, no policies are enforced.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be supported by other SE implementations. Also, this
+# property does not override other security properties which can restrict
+# certificates such as jdk.tls.disabledAlgorithms or
+# jdk.certpath.disabledAlgorithms; those restrictions are still enforced even
+# if this property is not enabled.
+#
+jdk.security.caDistrustPolicies=SYMANTEC_TLS
+
+#
+# Policies for the proxy_impersonator Kerberos ccache configuration entry
+#
+# The proxy_impersonator ccache configuration entry indicates that the ccache
+# is a synthetic delegated credential for use with S4U2Proxy by an intermediate
+# server. The ccache file should also contain the TGT of this server and
+# an evidence ticket from the default principal of the ccache to this server.
+#
+# This security property determines how Java uses this configuration entry.
+# There are 3 possible values:
+#
+# no-impersonate - Ignore this configuration entry, and always act as
+# the owner of the TGT (if it exists).
+#
+# try-impersonate - Try impersonation when this configuration entry exists.
+# If no matching TGT or evidence ticket is found,
+# fallback to no-impersonate.
+#
+# always-impersonate - Always impersonate when this configuration entry exists.
+# If no matching TGT or evidence ticket is found,
+# no initial credential is read from the ccache.
+#
+# The default value is "always-impersonate".
+#
+# If a system property of the same name is also specified, it supersedes the
+# security property value defined here.
+#
+#jdk.security.krb5.default.initiate.credential=always-impersonate
+
+#
+# JNDI Object Factories Filter
+#
+# This filter is used by the JNDI runtime to control the set of object factory classes
+# which will be allowed to instantiate objects from object references returned by
+# naming/directory systems. The factory class named by the reference instance will be
+# matched against this filter. The filter property supports pattern-based filter syntax
+# with the same format as jdk.serialFilter.
+#
+# Each pattern is matched against the factory class name to allow or disallow it's
+# instantiation. The access to a factory class is allowed unless the filter returns
+# REJECTED.
+#
+# Note: This property is currently used by the JDK Reference implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# If the system property jdk.jndi.object.factoriesFilter is also specified, it supersedes
+# the security property value defined here. The default value of the property is "*".
+#
+# The default pattern value allows any object factory class specified by the reference
+# instance to recreate the referenced object.
+#jdk.jndi.object.factoriesFilter=*
+
+#
+# The default Character set name (java.nio.charset.Charset.forName())
+# for converting TLS ALPN values between byte arrays and Strings.
+# Prior versions of the JDK may use UTF-8 as the default charset. If
+# you experience interoperability issues, setting this property to UTF-8
+# may help.
+#
+# jdk.tls.alpnCharset=UTF-8
+jdk.tls.alpnCharset=ISO_8859_1
+
+#
+# PKCS12 KeyStore properties
+#
+# The following properties, if configured, are used by the PKCS12 KeyStore
+# implementation during the creation of a new keystore. Several of the
+# properties may also be used when modifying an existing keystore. The
+# properties can be overridden by a KeyStore API that specifies its own
+# algorithms and parameters.
+#
+# If an existing PKCS12 keystore is loaded and then stored, the algorithm and
+# parameter used to generate the existing Mac will be reused. If the existing
+# keystore does not have a Mac, no Mac will be created while storing. If there
+# is at least one certificate in the existing keystore, the algorithm and
+# parameters used to encrypt the last certificate in the existing keystore will
+# be reused to encrypt all certificates while storing. If the last certificate
+# in the existing keystore is not encrypted, all certificates will be stored
+# unencrypted. If there is no certificate in the existing keystore, any newly
+# added certificate will be encrypted (or stored unencrypted if algorithm
+# value is "NONE") using the "keystore.pkcs12.certProtectionAlgorithm" and
+# "keystore.pkcs12.certPbeIterationCount" values defined here. Existing private
+# and secret key(s) are not changed. Newly set private and secret key(s) will
+# be encrypted using the "keystore.pkcs12.keyProtectionAlgorithm" and
+# "keystore.pkcs12.keyPbeIterationCount" values defined here.
+#
+# In order to apply new algorithms and parameters to all entries in an
+# existing keystore, one can create a new keystore and add entries in the
+# existing keystore into the new keystore. This can be achieved by calling the
+# "keytool -importkeystore" command.
+#
+# If a system property of the same name is also specified, it supersedes the
+# security property value defined here.
+#
+# If the property is set to an illegal value,
+# an iteration count that is not a positive integer, or an unknown algorithm
+# name, an exception will be thrown when the property is used.
+# If the property is not set or empty, a default value will be used.
+#
+# Note: These properties are currently used by the JDK Reference implementation.
+# They are not guaranteed to be examined and used by other implementations.
+
+# The algorithm used to encrypt a certificate. This can be any non-Hmac PBE
+# algorithm defined in the Cipher section of the Java Security Standard
+# Algorithm Names Specification. When set to "NONE", the certificate
+# is not encrypted. The default value is "PBEWithHmacSHA256AndAES_256".
+#keystore.pkcs12.certProtectionAlgorithm = PBEWithHmacSHA256AndAES_256
+
+# The iteration count used by the PBE algorithm when encrypting a certificate.
+# This value must be a positive integer. The default value is 10000.
+#keystore.pkcs12.certPbeIterationCount = 10000
+
+# The algorithm used to encrypt a private key or secret key. This can be
+# any non-Hmac PBE algorithm defined in the Cipher section of the Java
+# Security Standard Algorithm Names Specification. The value must not be "NONE".
+# The default value is "PBEWithHmacSHA256AndAES_256".
+#keystore.pkcs12.keyProtectionAlgorithm = PBEWithHmacSHA256AndAES_256
+
+# The iteration count used by the PBE algorithm when encrypting a private key
+# or a secret key. This value must be a positive integer. The default value
+# is 10000.
+#keystore.pkcs12.keyPbeIterationCount = 10000
+
+# The algorithm used to calculate the optional MacData at the end of a PKCS12
+# file. This can be any HmacPBE algorithm defined in the Mac section of the
+# Java Security Standard Algorithm Names Specification. When set to "NONE",
+# no Mac is generated. The default value is "HmacPBESHA256".
+#keystore.pkcs12.macAlgorithm = HmacPBESHA256
+
+# The iteration count used by the MacData algorithm. This value must be a
+# positive integer. The default value is 10000.
+#keystore.pkcs12.macIterationCount = 10000
blob - /dev/null
blob + 69716fa6aaf271045c435ad2629a552aa389a885 (mode 644)
--- /dev/null
+++ wiki.d/Ipmi.Java
+version=pmwiki-2.3.20 ordered=1 urlencoded=1
+agent=w3m/0.5.3+git20230121
+author=jrmu
+charset=UTF-8
+csum=
+ctime=1724826889
+host=104.167.242.140
+name=Ipmi.Java
+passwdedit=@admins
+passwdread=@admins
+rev=2
+targets=
+text=From Sysop_NiteStorm:%0a%0aTo get Java to override the security warning. Modify a java file in C:\Program Files\Java\jre1.8.0_421\lib\security%0a%0aModify the java.security file:%0a%0aAttach:java.security.txt%0a%0aComment out a few things. You will still get a few errors but you are able to bypass them.%0aPut the modified file in C:\Program Files\Java\jre1.8.0_421\lib\security then you login to that spider device, download the spider.jnlp file%0a%0aTake note of the pass to that file open a command prompt and type:%0a%0ajavaws driveletter:\restoffullpath\spider.jnlp%0a%0aThat will open the connection%0a%0aAdd spider2.dataideas.com to the "exception" list in java%0a%0aTo get around the two security issues, first you click ok ;the second you have to click/check run anyway then click run%0a
+time=1724826949
+author:1724826889=jrmu
+diff:1724826889:1724826889:=1,20d0%0a%3c From Sysop_NiteStorm:%0a%3c %0a%3c To get Java to override the security warning. Modify a java file in C:\Program Files\Java\jre1.8.0_421\lib\security%0a%3c %0a%3c Modify the java.security file:%0a%3c %0a%3c Attach:java.security.txt%0a%3c %0a%3c Comment out a few things. You will still get a few errors but you are able to bypass them.%0a%3c Put the modified file in C:\Program Files\Java\jre1.8.0_421\lib\security then you login to that spider device, download the spider.jnlp file%0a%3c %0a%3c Take note of the pass to that file open a command prompt and type:%0a%3c %0a%3c javaws driveletter:\restoffullpath\spider.jnlp%0a%3c %0a%3c That will open the connection%0a%3c %0a%3c Add spider2.dataideas.com to the "exception" list in java%0a%3c %0a%3c To get around the two security issues, first you click ok ;the second you have to click/check run anyway then click run%0a
+host:1724826889=104.167.242.140
blob - /dev/null
blob + 3466114ea1d60f4f158ea83de4b02a91faf840b8 (mode 644)
--- /dev/null
+++ wiki.d/Ipmi.RecentChanges
+version=pmwiki-2.3.20 ordered=1 urlencoded=1
+agent=w3m/0.5.3+git20230121
+charset=UTF-8
+ctime=1724826889
+host=104.167.242.140
+name=Ipmi.RecentChanges
+rev=1
+text=* [[Ipmi/Java]] . . . @2024-08-28T06:34:49Z by [[~jrmu]]: [==]%0a
+time=1724826889
